Volvo 480 Turbo from Siberia
Moderators: jifflemon, coyote1980, Rachel
- jamescarruthers
- 480 Is my middle name
- Posts: 2530
- Joined: Mon Jul 07, 2003 3:19 pm
- Location: Cambridge
Re: Volvo 480 Turbo from Siberia
I think that takes the vacuum for the engine and sort of damps it out and acts a a reservoir of vacuum power for the ventilation push buttons.
1987 Volvo 480 ES, 507274, 217 - Red (Ness)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)
Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)
2006 Citroen C6 Exclusive 3.0 petrol/LPG
2008 Mini Cooper convertible (Mau)
Previous 480's:
J123 CFU -- ES
J449 MNL -- ES auto
D864 CPV -- ES
L691 JFC -- Turbo
F70 MNR -- ES
H858 FGV -- Turbo auto
E981 KHM -- ES (509849)
Re: Volvo 480 Turbo from Siberia
James is correct, thats exactly what it's for.
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Thanks guys, you were right, about the stove, now another question, finally got to the connection, preferably show in the photo where the tubes from the Throttle go, and from the electric inflation valve, I would be grateful, I’m also interested in how the electrical wiring braid is located It would be great if a detailed video was made! who has a turbo, the desire to wish everything is right, there is not much in the books, I have 3 books tired of looking for where everything goes.
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Hi all people! The work is in progress, the car is being built, the motor went over, the box went through, everything is buzzing, it is good that the engine no longer troit, and it runs smoothly, the speed does not float. Yesterday I made a new exhaust system from a stainless pipe with a diameter of 63 mm, right now I'm doing a cast and updating all the electrics. I have a request, is there a thread from England from the city of Southampton, or maybe someone nearby? is there a person ready to give my friend who also restores Volvo spare parts and send them to him? he has no opportunity to come because he lives in Kazakhstan, in Astana. All expenses will of course be covered. you can also take away from this person 2 wheels on the original disks, can anyone need it ?!
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Hi all!
Help me pick up or at least find analogues of the relay!
I’m interested in a relay that is located under the hood under the letters “G” “B” “C”, I doubt that I will find an original here, well, at least I’ll pick it up, I had some incomprehensible ones, and they closed the network for me when I started to launch a new electrical wiring!
Help me pick up or at least find analogues of the relay!
I’m interested in a relay that is located under the hood under the letters “G” “B” “C”, I doubt that I will find an original here, well, at least I’ll pick it up, I had some incomprehensible ones, and they closed the network for me when I started to launch a new electrical wiring!
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Hi all!
Tell me where I can see the wiring of the vacuum hoses that come from the turbine and from the solenoid valve, which is located near the high-voltage coil. I’m looking for information and can’t find it, the vacuum from VEM and from EZ found everything clear, but I can’t find it on the turbine! Help!
Tell me where I can see the wiring of the vacuum hoses that come from the turbine and from the solenoid valve, which is located near the high-voltage coil. I’m looking for information and can’t find it, the vacuum from VEM and from EZ found everything clear, but I can’t find it on the turbine! Help!
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Hi people!
Why doesn't anyone know the answer to my question?
Can you show pictures or photos of how your hoses are going?
Why doesn't anyone know the answer to my question?
Can you show pictures or photos of how your hoses are going?
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!
Re: Volvo 480 Turbo from Siberia
Hopefully this post contains the information that you need:
viewtopic.php?f=11&t=34487&p=208024&hil ... ur#p208024
viewtopic.php?f=11&t=34487&p=208024&hil ... ur#p208024
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Thank you friend! it helped me a lot!
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!
-
- Knows where Volvo is from
- Posts: 104
- Joined: Mon Mar 16, 2015 7:38 pm
- Location: Russia, Siberia, Krasnoyarsk
- Contact:
Re: Volvo 480 Turbo from Siberia
Volvo 480 Turbo!
I was born and live in Siberia!
I was born and live in Siberia!