Hi all
I have finally tried the inside lights and a few are not working:
I know that the bulb in the rotary switch has blown, is it why this cluster is dark?
InfoCentre is dark and there is not light on the Warning switch. Also, the little white knob that regulates the temperature is dark as well.
Any suggestion welcomed
Moi
what should be lit
Moderators: jifflemon, coyote1980, Rachel
-
- Advanced 480 rookie
- Posts: 561
- Joined: Thu Apr 06, 2017 8:11 pm
what should be lit
1993 Turbo auto called Skip for the important stuff
2011 Juke 190 for everything else
2011 Juke 190 for everything else
Re: what should be lit
The bulb for the rotary switch lights up the switches.
I replaced mine, the switches on mine are bright but the switch is still dim.
I replaced mine, the switches on mine are bright but the switch is still dim.
Re: what should be lit
I've less worried about the bulbs, more on the function and dash board remaining in one piece, mostly held by the vinyl!
I just remember the top is screen and bottom is 'rear' fog lights so the middle must be front fogs
the hazard should also be lit, mine was dark for about ten years then suddenly burst into life (without any input from me ), in reality it's too bright
the info centre switch has never lit up on ours, and when I had one apart I don't think there was a bulb . .. .
I just remember the top is screen and bottom is 'rear' fog lights so the middle must be front fogs
the hazard should also be lit, mine was dark for about ten years then suddenly burst into life (without any input from me ), in reality it's too bright
the info centre switch has never lit up on ours, and when I had one apart I don't think there was a bulb . .. .
Alan
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
480 ES 2litre 'Celebration' ? , C30 1.8ES, SS1
-
- Advanced 480 rookie
- Posts: 561
- Joined: Thu Apr 06, 2017 8:11 pm
Re: what should be lit
So
1.2W T5 for the rotary switch and ideally 0.36W for the Warning light.
Step by step
I would like everything to work as it should
1.2W T5 for the rotary switch and ideally 0.36W for the Warning light.
Step by step
I would like everything to work as it should
1993 Turbo auto called Skip for the important stuff
2011 Juke 190 for everything else
2011 Juke 190 for everything else