MAF hose

Here you can talk about the joy owning a Volvo 480 brings. Non-technical discussions take place here, like what is the difference between an ES and a S version.

Moderators: jifflemon, coyote1980, Rachel

Post Reply
ClioRSiTurbo
Started learning about 480
Posts: 94
Joined: Wed Apr 11, 2012 10:54 pm

MAF hose

Post by ClioRSiTurbo » Tue Apr 24, 2012 9:38 pm

Any idea where I can get a MAF to turbo hose, or is there a good after market replacement solution? Mine has a rip at the bottom.

Hose is the 2nd photo in this thread

http://www.volvo-480-europe.org/forum/v ... =11&t=4644

Someone please help :wall:
Top
ClioRSiTurbo
Started learning about 480
Posts: 94
Joined: Wed Apr 11, 2012 10:54 pm

Re: MAF hose

Post by ClioRSiTurbo » Sun May 06, 2012 1:12 am

Bump
Top
r5b18ft
Knows where Volvo is from
Posts: 190
Joined: Wed Nov 05, 2008 10:04 am

Re: MAF hose

Post by r5b18ft » Wed May 09, 2012 11:51 pm

I have replaced mine with a series of aluminium and silicone pipes. You'll need one 90 degree aluminium pipe with same outer diameter as turbo, another 90 degree with same diameter as MAF, a silicone reducer for both and 2 straight couplers. I have then welded a small piece of pipe to make a fitting for the idle control valve.

I'll try to take a photo and post it when i have some time.
Top
ClioRSiTurbo
Started learning about 480
Posts: 94
Joined: Wed Apr 11, 2012 10:54 pm

Re: MAF hose

Post by ClioRSiTurbo » Sat May 12, 2012 2:41 am

Thank you
Top
Post Reply

Return to “General Discussions”