changing gearbox
Moderators: jifflemon, coyote1980, Rachel
- AMDforce
- Knows an Aerodeck isn't a 480
- Posts: 203
- Joined: Thu Jun 16, 2005 2:00 pm
- Location: belgium
- Contact:
changing gearbox
when you wanna change the gearbox , do you have to lift your engine out???
http://photobucket.com/albums/b328/amdforce/
- Ally
- Can tell where the 480 was built
- Posts: 347
- Joined: Fri Mar 11, 2005 3:28 pm
- Location: Sitting in the sun
http://volvo480.northernscum.org.uk/for ... php?t=8256
Talking about changing the clutch, but gearbox is out anyway...
Talking about changing the clutch, but gearbox is out anyway...
Fred - 1995 480 2.0i ES - Dark Green Metallic (106,000 miles)
Dave - 1993 480 2.0i ES - Steel Grey Metallic (148,000 miles)
Dave - 1993 480 2.0i ES - Steel Grey Metallic (148,000 miles)
- alfonzobonzo
- 480 Rookie
- Posts: 454
- Joined: Mon Dec 13, 2004 1:05 pm
- Location: taste that Otter Ale
- Contact:
- haz@nocturnal_development
- 480 Rookie
- Posts: 405
- Joined: Sat Mar 12, 2005 9:11 pm
- Location: ormskirk, west lancs
hi,
you can do it 3 ways dependant if your just changing the clutch, changing the box or doing a few other jobs too. box out on its own, engine and box out together or drop the entire subframe.
if your just changing the box then i'd just take that out.
haz
you can do it 3 ways dependant if your just changing the clutch, changing the box or doing a few other jobs too. box out on its own, engine and box out together or drop the entire subframe.
if your just changing the box then i'd just take that out.
haz
reanualt 5 campus, Volvo turbo conversion, hybrid T28, -31 actautor, external oil cooler, THS intercooler, rear radiator, large throttle, Adaptronic ECU, cossie blue injectors. results recorded '06 (21 psi 228bhp/229lbs),(23psi 12.6 @108mph)