Hi all.
My 460 Turbo is sounding very tappety of late.
I don't suppose anyone's got a big bucket of tappet shims knocking about at the bottom of the garage?
Cheers,
Steve
B18FT Tappet Shims
Moderators: jifflemon, coyote1980, Rachel
- doingitsideways
- 480 Expert
- Posts: 659
- Joined: Wed May 02, 2012 8:55 pm
- Location: Manchester
B18FT Tappet Shims
"If you can't fix it with a hammer, it's an electrical fault!"
Hammers can't fix a 480!!!
Hammers can't fix a 480!!!
- glasgowjim
- 480 Is my middle name
- Posts: 4830
- Joined: Sun Oct 01, 2006 5:28 pm
- Location: GLASGOW SCOTLAND
Re: B18FT Tappet Shims
Sorry dont have any of those in SOMD but I will soon be swopping over a head onto my daughters 2 ltr 480 so the old head is bound to have shims on it if you are really stuck
- doingitsideways
- 480 Expert
- Posts: 659
- Joined: Wed May 02, 2012 8:55 pm
- Location: Manchester
Re: B18FT Tappet Shims
Cheers Jim.
I'll probably take them off your hands if I've not managed to find anything by then.
From what I've found though, most heads have pretty much the same shims from the factory, but you never know if they've ever been done.
Steve
I'll probably take them off your hands if I've not managed to find anything by then.
From what I've found though, most heads have pretty much the same shims from the factory, but you never know if they've ever been done.
Steve
"If you can't fix it with a hammer, it's an electrical fault!"
Hammers can't fix a 480!!!
Hammers can't fix a 480!!!