Search found 140 matches

by Williewammes
Tue Aug 01, 2006 10:20 am
Forum: Engine (20)
Topic: stuttering engine at full throttle
Replies: 7
Views: 2844

Hey, Found the problem. The turbopressure was too high, and the valve between the inlet and outlet of the turbo had blown. That plastic thing in the back of the compartment. Now, the valve does pppsssshhht again :rofl: But, new problem arived. Now the engine is stuttering when lifting the throttle. ...
by Williewammes
Thu Jul 27, 2006 8:49 pm
Forum: Engine (20)
Topic: how long does it take to overheat the engine?
Replies: 4
Views: 1380

Yep mate. Tipical results for an aoverheated engine. Same happened to me, but still no sign of head gasket damage. Seems like it can get a lot of heat and pressure before giving up. In my case the only problem is that the thermostat is working bad because of the 110ºC it took. It isn't completely b...
by Williewammes
Thu Jul 27, 2006 8:00 pm
Forum: Engine (20)
Topic: stuttering engine at full throttle
Replies: 7
Views: 2844

stuttering engine at full throttle

Hey Guys, Strange thing suddenly occured. When I'm at full throttle the engine starts to stutter. When I drive it calm, no problem. Disconnected the knock sensor for a short test drive, but things only became worse. After refitting the plug the engine keeps on stuttering the same way as without the ...
by Williewammes
Mon Jul 24, 2006 3:42 pm
Forum: Tuning And Tweaking
Topic: My new induction kit fitted! HOO WOO
Replies: 23
Views: 7535

Hey,

You could also get rid of the daytime running light (drivers side) and convert that to an air intake. It would perfectly fit on the original intake.

Don't know if it is permitted though....
by Williewammes
Wed Jul 19, 2006 11:47 am
Forum: Styling
Topic: Available soon: clear side/front markers/indicators
Replies: 115
Views: 67655

Hey Guys, Sorry for the big delay, but I have veen busy graduating. But, good news is on the way. All the moulds are ready, all I have to do now is fixing a vacuummachine to get all the air out of the plastic before pouring it. As soon as I have a good set of all the units, the pics will be placed h...
by Williewammes
Sat Jun 03, 2006 8:09 am
Forum: Styling
Topic: Bakke - Redcap project
Replies: 127
Views: 40795

@ Bakke,

Are you spraying the cars yourself?
I need my car to be sprayed because of some rust coming through the reaar wheel arches, but it will cost quite an ammount of money Allthough it is done by someone I know. Was just wondering. how you will be doing that.
by Williewammes
Wed May 24, 2006 8:24 am
Forum: Brakes (50)
Topic: ABS light on for 30 seconds
Replies: 8
Views: 3885

Thanks for the reply. It is indeed the first type of ABS system. When I have been driving for quite a while and shortly after that start the car, the light goes out much quicker too. I was kinda hoping it was allright, but now I can say that to my girlfriend without doubt :wink: She once asked me ab...
by Williewammes
Wed May 24, 2006 6:40 am
Forum: Brakes (50)
Topic: ABS light on for 30 seconds
Replies: 8
Views: 3885

ABS light on for 30 seconds

Guys, After starting the car the ABS light and the brake warning light stay on for about a minute before going out. Can it have anything to do with the sensors being dirty, or does the system have a problem with its brake pressure? I also have the idea that some of the ABS relais is missing. Now the...
by Williewammes
Wed May 24, 2006 6:25 am
Forum: Engine (20)
Topic: starting problem
Replies: 10
Views: 2546

Your probs seems similar to mine a vew months ago. It would start whenever it wanted too. Untill suddenly I heard a weird sound during starting. The next time I was in the car with a friend of mine I said to him "listen to the sound of the starter engine, it doens't sound good". Then, nothing happen...
by Williewammes
Wed May 24, 2006 6:13 am
Forum: Tuning And Tweaking
Topic: De-cat dimentions
Replies: 29
Views: 7271

Funny, Changed my own rear damper for a double exit one. a vew days ago I have also been driving it without any damping, just the downpipe and the cat. My neigbour once had a chevy corvette and he walked up te me and asked me how I got the corvette sound in my volvo. It sounded great, but now I have...
by Williewammes
Thu May 18, 2006 8:46 am
Forum: Styling
Topic: Available soon: clear side/front markers/indicators
Replies: 115
Views: 67655

Today I will order the right plastics and will try again with that one. This plastic has a much lower viscosity than the one I tested with, so the ammount of air inside will be much smaller, and it will fill the mould more properly. If that doesn't work, I will try the vacuümmachine. Thanks for the...
by Williewammes
Wed May 17, 2006 8:39 pm
Forum: Styling
Topic: Available soon: clear side/front markers/indicators
Replies: 115
Views: 67655

Down kitty, down :rofl: Done the first tests with the moulds. Clusters are looking pretty good alltough I'm still encountering problems with some air that can't get out of the mould. Today I did the second test and tomorow morning I will see the result of that. Anyway, I will continue till the resul...
by Williewammes
Thu May 11, 2006 9:05 pm
Forum: Body and Interior (80)
Topic: Fibrating wipers
Replies: 10
Views: 2710

Thanks Daniël,

I will give that a try then.
by Williewammes
Thu May 11, 2006 6:25 am
Forum: General Discussions
Topic: What colour is Rachel's 480?
Replies: 20
Views: 3719

I think the solutions lies in wether the sun is shining or not. It's like that with more 480 colours. My own car is 318, paris blue metallic, but I had to look under de bonnet to make sure it was indeed 318. In the sunlight it looks quite light, but in bad weather, it almost looks dark blue. ANd, to...
by Williewammes
Thu May 11, 2006 6:07 am
Forum: Styling
Topic: front number plate
Replies: 16
Views: 5096

Hi there, I think they made two different numberplate holders for the 480. My everyday car has a typical looking one, but my spare car has normal looking one, altough it's shape matches the frontbumper. Maybe it's got something to do with the old en newer types. In that case, I may like the old one ...
by Williewammes
Wed May 10, 2006 9:59 am
Forum: Styling
Topic: Available soon: clear side/front markers/indicators
Replies: 115
Views: 67655

Allready started today. Looking good guys!!
by Williewammes
Wed May 10, 2006 6:09 am
Forum: General Discussions
Topic: What driving style do u mainly use driving yours??
Replies: 40
Views: 7067

Hey, Only drive it full when it's warmed up nicely. Doing so will definetly save your engine. Two weeks ago, I also drove the car to the limit, suddenly noticing that the radiator had blown and the temperature was rising rapidly. I was glad always having the temperature on the boardcomputer so I not...
by Williewammes
Tue May 09, 2006 8:26 pm
Forum: Styling
Topic: Available soon: clear side/front markers/indicators
Replies: 115
Views: 67655

Yeaaah,

Materials have arived today.

Tommorow morning 6.30 I will start with the moulds. Can't wait.
by Williewammes
Tue May 09, 2006 11:14 am
Forum: Body and Interior (80)
Topic: Fibrating wipers
Replies: 10
Views: 2710

Well okay, That must be the reason then. I will use my current wipers till they are worn out and then i'll try to get hold of the original volvo wipers. I can first test it with my spare car. I think this one has the original wipers installed at the factory. Car only did 7000 testmiles eding in a sc...
by Williewammes
Tue May 09, 2006 8:40 am
Forum: General Discussions
Topic: I never realised.....
Replies: 15
Views: 3038

Indeed it is fibreglass, just as 10% of the rest of the bodyweight. Saw a 480 at the scrapyard about 2 months ago and it had a bonnet that did brake down. The point where the hinge is attached, was broken of. You could clearly see the fibre structure there. Volvo didn't mention the "plastic" bonnet ...